Buy Eemax SP3012 Tankless Water Heater, Single Point Hand WashingEemax SP3012 Tankless Water Heater, Single Point Hand Washing Product Description:
- Ease of installation - No T and P valve needed - Only bring one cold water line to lavatory
- Connections: 3/8-Inch compression fittings at top of unit
- Voltage: 120V, Power: 3.0kW
- Temperature rise at 0.5GPM = 40 Degree Fahrenheit, Turn on: 0.5
- Dimensions: 10.75-Inch W x 5.25-Inch H x 3-Inch D
Product Description
Eemax SP3012 3.0KW 120V SINGLE POINT
Customer Reviews
Most helpful customer reviews
12 of 12 people found the following review helpful.
By James T.
This unit is rated at 40 degree F temperature increase at 0.5 gallons per minute (GPM). To understand this first you will have to know what your cold water temperature is for where and when you want to use this device. My cold water source is about 50F in the morning here in January. Add 40F to that, the unit will put out 90F hot water. Next you need know understand how much 0.5 GPM output is. It is certainly not full throttle on the hot water valve. More like what comes out of a drinking fountain. You can simulate this in your kitchen sink with a gallon milk container to see the actual output. Now that your expectations are set and if that works for you, you will be happy with this product. It is compact, simple and easy to install. I installed this on my own in for a bathroom sink where there is only cold water source. I did not have a dedicated circuit for this but i do have it in a GPFI breaker outlet. You will need to get the proper gauge wiring to install this as it does NOT come with a power cable. Proper grounding is VERY important here. It is a high power appliance after all. One down side of my setup is that the lights go dim when this thing is running because they are on the same circuit. The instructions recommend a control valve on both the incoming cold water hose and the outgoing hot water hose, I did not have either one installed since my cold water pressure is in range and I can control the hot water output from my faucet. I spent about 35 bucks on additional parts from the hardware store to get this running and it took a couple hours since I had to run to the store a few times. No special tools are required. My complaints are that the cover is very difficult to put back on and that there's no where to grip when i was tightening the hoses to this unit.
2 of 3 people found the following review helpful.
By Carolyn B. Dunn
This unit is economical and takes up very little space under my bathroom sink. Hot water in less that a minute. Much less. You'll love it.
0 of 0 people found the following review helpful.
By Erlinda Sanchez
Easy to install. Used this one before that is why I stick to this product. Works great as always and have warm water in seconds.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
