Best Moog K80052 Control Arm with Ball Joint

Moog K80052 Control Arm with Ball JointBuy Moog K80052 Control Arm with Ball Joint

Moog K80052 Control Arm with Ball Joint Product Description:



  • Moog K80052 Control Arm with Ball Joint [Automotive]

Product Description

MOOG Chassis

    Customer Reviews

    Most helpful customer reviews

    0 of 0 people found the following review helpful.
    5Moog K80052 Control Arm with Ball Joint For my 2002 Ford Ranger
    By S. Vlach
    This was a perfect fit and well made item. Price is unbelievably great through Amazon. Replacing the ball joint was one thing, but being able to replace the whole arm with the other two bushings for such little more cost was an absolute no brainer!

    0 of 0 people found the following review helpful.
    5Moog Control Arms
    By Tammi
    As expected, Moog quality still rocks!!! I wouldn't use anything else. Quality bushings, quality, heavy duty boot, and a zerk fitting for servicing. The best!

    0 of 0 people found the following review helpful.
    5Great product
    By cesaric
    I replaced the upper control arms (and Moog lower ball joints, sway bar bushing, sway bar links) on my 2000 Ford Ranger before making a drive to Seattle from Tampa and back. They're solid well made products. Have had no issues whatsoever in the 10K miles I've put on them thus far. Moog parts are awesome. What else can I say.

    See all 7 customer reviews...


    Latest Price: See on Amazon.com!
    More Info: See on Amazon.com!
    See Customers Review: See on Amazon.com!

    Buy Moog K80052 Control Arm with Ball Joint

    Best Reviews of SpeedHeat Rugbuddy 470 Under Rug Space Heater, 5.5' X 8'

    SpeedHeat Rugbuddy 470 Under Rug Space Heater, 5.5' X 8'Buy SpeedHeat Rugbuddy 470 Under Rug Space Heater, 5.5' X 8'

    SpeedHeat Rugbuddy 470 Under Rug Space Heater, 5.5' X 8' Product Description:



    • Energy Efficient: 470 watts - less energy than 5 lightbulbs.
    • Safe: No risk of fire, overheating, or shock.
    • Invisible: Hidden under area rug.
    • Save energy by lowering your central heater settings.
    • Save energy by only heating the rooms you are using.

    Product Description

    The only portable area rug heater available today.

    NOTE: You MUST use a rug on top & a rug pad below. Follow instructions closely.

    For primary heating, cover 75-80% of open space.

    Simply place the extremely thin (less than 1/16") heater under your area rug and plug in.

    Can also be used with a timer or hard-wired with a thermostat. Safety assured by the IEC, radiant heating is also endorsed by the US Department of Energy.

    Customer Reviews

    Most helpful customer reviews

    3 of 3 people found the following review helpful.
    5Warm toes in Minnesota
    By CarriH
    It gets cold in Minnesota! We have a large family room in our older house with a horribly cold floor (it's built over a crawl space). I wouldn't think of sitting in this room without wool socks and slippers. Not any more! The rug buddy as transformed the floor into a cozy oasis where you want to keep your feet. I also believe it has warmed the entire room.The room has a hardwood floor and an area rug. We installed the Rug Buddy between the rug pad and the rug. The installation was easy and except for the cord you don't see it or feel it when you walk on the rug (you feel the warmth but not the thickness of the Rug Buddy). My only complaint is the cord which I felt was too short.

    1 of 1 people found the following review helpful.
    4not bad
    By flan flannigan
    I did much research before arriving at this purchase. I live in New England and have electric heat. My baseboard heaters run efficiently, but use between 750 and 1250 watts per heater. At 16.2 cents per kilowatt hour, the heating costs add up. I bought this and the 165 watt rugbuddy based on amazon reviews, and, after researching different types of electric space heaters, I thought the rugbuddy might heat my living space with lower watts. The rugbuddy works well in conjunction with other heaters running at lower temperatures, but is not so great as the sole heating source unless the weather is brisk outside. The 165 works great in conjunction with the smallest, 350/500 watt baseboard heater in the bedroom. when it is 17 to 20 degrees outside, the room is 64 degrees inside. Plastic window insulation, thermal curtains, weather stripping, and caulking all contribute to help raise the temperature while lowering power consumption. However, the 470, I feel should emit a little more heat. I have been contemplating testing out a piece of aluminum foil between the rugbuddy and the rug to increase the heat produced. But I'm not quite sure if that will lead down the path to Darwin award candidacy. I wish the manufacturer would supply a rug mat that might amplify the heat in such a manner with safety consciousness in mind.

    0 of 0 people found the following review helpful.
    5Perfect for Our Sun Room!
    By Ron Simmons
    We bought this for our 10' x 12' sun room, where we spend most evenings no matter what season. As we live in Chicago, it can get quite cold in the winter. We put the Rugbuddy down, using the recommended pad they sell, put our rug over it, and now have perfectly warm feet, no matter how cold it is outside. We absolutely love it. I wish we had bought one 25 years ago, when we had the room built.

    See all 5 customer reviews...


    Latest Price: See on Amazon.com!
    More Info: See on Amazon.com!
    See Customers Review: See on Amazon.com!

    Buy SpeedHeat Rugbuddy 470 Under Rug Space Heater, 5.5' X 8'

    Buy Online Moog K80068 Front Upper Control Arm and Ball Joint

    Moog K80068 Front Upper Control Arm and Ball JointBuy Moog K80068 Front Upper Control Arm and Ball Joint

    Moog K80068 Front Upper Control Arm and Ball Joint Product Description:



    • Moog K80068 Front Upper Control Arm and Ball Joint [Automotive]

    Product Description

    MOOG Chassis

      Customer Reviews

      Most helpful customer reviews

      2 of 2 people found the following review helpful.
      5Quality product. Perfect fit.
      By markp_13
      I bought this item because the ball joint on my 2003 Ranger was worn out. Since the ball joint itself is not serviceable, you have to buy and replace the entire control arm. This fit right in with no issues. Also I like that it has a grease fitting.I threw out the box...but I'm pretty sure this was made in the USA.

      1 of 1 people found the following review helpful.
      5easy to install - 2002 mazda B3000 (Ford Ranger)
      By Teddo
      I installed this on a 2002 Mazda B-3000 Truck (Ford Ranger Edge). I was a little concerned because my original control arm was two pieces (like the ACDelco 45D0090 Front Upper Control Arm Ball Joint Kit) and I was not sure if this was actually a replacement for the two piece arm or not. IT IS and the truck was aligned with no problems at all. The reason I replaced the whole arm instead of just the piece that has the ball joint on it is because the single arm also has new bushings where it attaches to the frame. May as well replace them too.I also installed the Raybestos camber/ castor kit (Raybestos 616-1011 Professional Grade Wheel Alignment Caster/Camber Bolt Kit) instead of the Moog one since it had more adjustment than the Moog kit does. If you do this you don't need to keep the original bolts or the cam that factory sets the alignment. Everybody says to install a camber/castor kit for better alignment.Installation was fairly easy - just watch You Tube (https://www.youtube.com/watch?v=P4IPUUjKWBE - parts 1 and 2; part 1 is the lower ball joint, but includes how to remove the upper ball joint). The only difference between what the guy on You Tube says and what Moog says is that Moog says that you install the arm and leave the bolts that attach to the frame loose, then tighten them after the wheel is on the ground - this is much easier than the way the video suggests. It makes sense, the lower control arm really holds the weight of the truck - the upper control arm just follows it. Just read the directions that come with the new control arm.The ball joint comes with a zerk fitting so be sure to grease it until the boot swells a bit (NOT TOO MUCH)- it is NOT pre-lubed and ready to go. NLGI No.2 appears to be the what Ford would recommend IF their ball joints had grease fittings.Also be careful to put the correct control arm on the correct side - Right = the passenger side, Left = driver's side -- It has "L" or "R" stamped on the top of the arm --it is possible to install them on the wrong sides if you aren't careful.

      1 of 1 people found the following review helpful.
      5Well built part, easy to install
      By Alex W. Ackerman
      My neighbor and I installed this on my 1998 Mercury Mountaineer. Removing the old UCA was pretty easy and installing the new one was even easier. The SUVs suspension feels much tighter and it doesn't feel like it's going to bounce all over the road.

      See all 6 customer reviews...


      Latest Price: See on Amazon.com!
      More Info: See on Amazon.com!
      See Customers Review: See on Amazon.com!

      Buy Moog K80068 Front Upper Control Arm and Ball Joint

      For Sale Pem America 6-Tier Metal Bathroom Shelf, Chrome

      Pem America 6-Tier Metal Bathroom Shelf, ChromeBuy Pem America 6-Tier Metal Bathroom Shelf, Chrome

      Pem America 6-Tier Metal Bathroom Shelf, Chrome Product Description:



      • One shelf set with a bright chrome finish
      • Crafted in China of chrome with glass shelving
      • Includes 3 shelves evenly spaced
      • Easy-to-follow assembly instructions included
      • Shelf set is 27 inches high; shelves measure 13 by 11 inches

      Product Description

      Chrome metal 6 tier shelf units. All chrome metal frame with 6 glass shelves.

      Customer Reviews

      Most helpful customer reviews

      1 of 1 people found the following review helpful.
      4Sturdy and functional
      By Clifford Hong
      The product is everything I expected to be. It's sturdy and is not shaky at all. If I were to give it a little bump, nothing would fall. Lookswise, it's probably the best looking thing in my bathroom (keep in mind I am a college student male though). It's about 5 feet high. Only thing that is preventing me to give it 5 stars, is the LONG setup process. Give yourself about an hour to build it.

      1 of 1 people found the following review helpful.
      4Form and Function for the modern home
      By Michele Mills
      This chrome shelf is wonderful for the bathroom but would also work very well in the kitchen, to hold small appliances and clear your counters, in the living room for prized knick knacks or of coarse in the bathroom. The chrome is quite modern, although chrome can fleck off easily. This rack has held up better than I expected in the bathroom with the humidity. Once assembled it is very sturdy and attractive.

      1 of 1 people found the following review helpful.
      4Great Addition to the Bathroom.
      By craftyscrapper
      This shelf unit has enough room for plenty of towels and some decorative acessories. Putting it together was easy although my only complaint is that mine leans to one side just a little. Good value for the price overall.

      See all 4 customer reviews...


      Latest Price: See on Amazon.com!
      More Info: See on Amazon.com!
      See Customers Review: See on Amazon.com!

      Buy Pem America 6-Tier Metal Bathroom Shelf, Chrome