Buy Bosch 09258 Premium Spark Plug Wire SetBosch 09258 Premium Spark Plug Wire Set Product Description:
- Stainless steel Mag winding delivers maximum voltage to the spark plug for a hotter, more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static
- 100% Pure silicone jacket resists oil penetration, for lifetime protection against wire set failure
- EPDM inner insulation stops power-robbing voltage leaks
- "Snap lock" terminals or OEM style connectors ensures that wires are tightly crimped to the connectors to exceed OEM standards, providing worry-free installation and re-installation
- Backed by a "no hassle" lifetime guarantee
Product Description
State-of-the-art manufacturing technology and quality control systems ensure that Bosch Premium Wire Sets meet, and often exceed, the performance of the original equipment wire sets that they replace. That's true for all of the components, including the wire set boots and connectors.
Customer Reviews
Most helpful customer reviews
1 of 1 people found the following review helpful.
By Anibal Eduardo Perez
These cables are slightly longer than the original ones installed in my BMW 318is model: 1996, but this didn't make any inconvinience. The plugs were inserted properly in both ends (coil pack and plugs). unfortunately, the plugs of the coil pack side, are 90 degrees angled, while the originals are about 120 degrees, it will not allow the installation of the dust cover under the bottom of the coil pack. If omiting the installation of such protection is not a problem for you, you may use them, otherwise it will not be recommended because the dust protection will not be reinstalled.
1 of 1 people found the following review helpful.
By E. J Tastad
These seem to be the same set as the factory wires I replaced, having the same brand of connectors, equal quality, etc. They are 7mm wires. They work fine, except they are a few inches longer than the originals (probably so they fit a couple models). I am using them in my 1995 BMW M42 engine. I give them 5 stars because they cost significantly less than buying the factory set (about $80 per wire) for equivalent quality.To replace your spark plug wires for a '95 318ti (others probably similar), be sure to remove the negative battery cable, remove the coil pack (2 - 10mm nuts), the spark plug wire cover (loosen the two twist connectors with a coin and lift off the cover), unhook the spark plug wires, loosen the two nuts (12mm) on the spark plug wire harness right above the exhaust manifold (it might be easier to remove the battery to access these), snap the plastic tray out from by the spark plugs, and lift the wires out as a unit (all 4 wires and their 2 routing trays). Replace the wires one at a time, and insert in reverse order.I am using these in conjunction with the NGK BKR6EQUP spark plugs, and they seem to work fine. Don't know about longevity yet.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
