Deals for Denso 234-9015 Air Fuel Ratio Sensor

Buy Denso 234-9015 Air Fuel Ratio Sensor

Denso 234-9015 Air Fuel Ratio Sensor Product Description:

• Manufactured to detect the amount of exhaust gas air fuel ratio
• Constructed from durable material
• Features zirconia solid electrolyte
• Highly accurate
• Easy installation

Product Description

Denso Air and Fuel Ratio sensor is designed to detect the amount of the exhaust gas air and fuel ratio. It is constructed from durable material that is corrosion and abrasion resistant. This sensor features zirconia solid electrolyte integrated with alumina heater substrate which precicely controls the amount of oxygen concentration that flows into the diffusion layer to limit current flow. This sensor can easily be installed and ensures longevity.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
Works with 2004 Subaru Forester non-turbo
By Cusomer
Although not listed as compatible this sensor (234-9015) is direct replacement for factory sensor 2004 Subaru Forester non-turbo. Original Subaru part is exactly the same sensor, all construction is exactly the same as the one I pulled from the car except wiring insulation color.All retailers list different sensor for this Subaru model, but electrical connector does not fit.Cleared P0032 code nicely.

2 of 2 people found the following review helpful.
GREAT PRODUCT!!
By Mitchell W. Riggins
I drive a 2003 Subaru Baja and recently found on my dashboard display that my "Check Engine" light was on. After an engine analysis, I told by the dealership that I needed to replace the "upstream" oxygen sensor. They quoted me $215 for the part, and another $250 for the install. OUCH!! I declined their service-sell and decided I would try to perform this fix myself. After all, it couldn't be brain surgery. After extensive internet research, I found that DENSO was the OEM manufacturer for Subaru's own oxygen sensor. DENSO's part # 234-9015 oxygen sensor was an "exact fit" replacement. I was able to purchase the part through Amazon and have it overnighted to my front door for only $106. I performed the installation myself and, although I am FAR from a mechanic, I successfully completed the install in about 40 minutes (now that I know how to do it, it would only take about 20 minutes!). After removing the old Subaru oxygen sensor, I compared it to the new DENSO #234-9015 oxygen sensor. Except for the color of the wires, they were identical in every way. It was a "plug 'n play" installation, for sure. Immediately after install, I cranked the car and checked the dash display ... TAH DAH ... no more "Check Engine" light glaring at me. Car successfully repaired ... money in my pocket!!

1 of 1 people found the following review helpful.
Worked perfectly in a 2004 Subaru Forester
By Mitchell Feinstein
The part worked in my 2004 Subaru Forester without any issues. It was difficult to get in but I bought these two items to make the installation easier:Lisle 12230 Oxygen Sensor Thread ChaserPowerbuilt 648691 Oxygen Sensor Offset PullerThe trick was finding the right angle to loosen the sensor with the oxygen sensor offset puller.

See all 12 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons for Roomba iRobot RED Cordless Robotic Vacuum Cleaner 4100

Buy Roomba iRobot RED Cordless Robotic Vacuum Cleaner 4100

Roomba iRobot RED Cordless Robotic Vacuum Cleaner 4100 Product Description:

• The Roomba Red comes with - Rechargeable battery, 7 hour charger, 1 Virtual Wall unit, 3 Filters

Product Description

iRobot Roomba RED Cordless Robotic Vacuum Cleaner - Wouldn't be nice to have a robot servant? It's not science fiction anymore. Roomba is the first practical robot for your home. It vacuum cleans floors all by itself roaming through your room like a pet, sucking dirt and dust all along its path. There are no cords or wires. It simply runs on a rechargeable battery. Red is the Roomba that attracts. While all Roombas work hard and eliminate dirt, it's Red that gets the stares. What's more, behind the beautiful design is a vacuuming robot that does what Roombas do: it cleans. So...to help reduce the monotony of cleaning your floors, get a Roomba. It goes where no vacuum has gone before.

Customer Reviews

Most helpful customer reviews

19 of 19 people found the following review helpful.
It's great! But I feel that way because I'm smart enough to know what to expect from it
By Jeffery S. Forrest
Roomba Red does not clean a room nearly as fast as when you use a regular vacuum. ButI don't care how long it takes because I put it in a room right before I leave the house and when I come back the floor in that room is clean. Then I charge it and clean the next room the next time I leave the house.I got the optional wall hanger and fast charger from IRobot.com and I can recharge it in 3 hours and clean two rooms or more in a day.It excells at picking up cat hair and dirt from both our hardwood floors and area rugs. It is also GREAT for cleaning under beds and some furniture such as our baby's crib.You do have to clean the rollers every few weeks or they get too wrapped up with fur, strands of string, etc. It tells you this right in the manual, so it shouldn't shock anyone.We kept our uber-powerful Hoover Windtunnel upright for times when we need to clean a room faster and/or need to use the hose attachement for corners, sofas, blinds, etc. Together, the Hoover and Roomba are a perfect team.We bought ours from a brick and mortar store and got the extended warranty (for 20% more I think) that gives us an immediate replacment if there are any problems. We did have to take it in once when a sensor failed and we were given a brand new machine on the spot.We love our Roomba! It is not a toy at all for us...it saves this dual career family lots of time and we keep our house cleaner than we would be able to otherwise.

14 of 14 people found the following review helpful.
Think!!!! I love people that make comments when they don't own one.
By K. Vaught
This item is a great item and well worth the money. We have a family of four with little kids and 2 dogs. The Roomba cleans our floors daily and does a great job. I would recommend this to anyone. I fully expect to get between 1 and 2 years out of my Roomba. After mine dies, I will buy another one (worth the $150.00/$99.00(re-manufactured) every two years)My advice would be to buy the Red and then buy the home base charger. The Discovery models offer a "MAX" Clean feature that I never use (it basically forces the unit to fully discharge the battery, getting a few more minutes of cleaning). Amazon has remanufactured units for $99.00 with a 90 day warranty. Buy it with AMEX and they will double the warranty. Good Luck!!!Edit: IT DOES work on carpets, medium or low pile. If you own shag (70's style) you may have a problem. My Roomba goes from hardwood to medium pile carpet (most carpet is medium) and back with no problems. Cover the front wheel with electrical tape to pro-long it on hardwoods.

15 of 16 people found the following review helpful.
I love my Roomba!
By L. Bourgeois
After the initial charge, the Roomba cleaned 4 rooms of my house on one charge. When it was done, the dust bin was pretty full, but still had a bit of room. This was impressive to me b/c it got under the sofas, beds, and dresser which had not been swept under in a long while. It picked up all of the dust and dog hair from my wood floors. I've been using it for a week now and my floors stay so much cleaner for much longer than if I just swept them. After that initial cleaning, I now set it to do a room a day. It's wonderful!

See all 19 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Prices for Denso 234-9021 Oxygen Sensor

Buy Denso 234-9021 Oxygen Sensor

Denso 234-9021 Oxygen Sensor Product Description:

• Manufactured to detect the amount of exhaust gas air fuel ratio
• Constructed from durable material
• Features zirconia solid electrolyte
• Highly accurate
• Easy installation

Product Description

Denso Oxygen Sensor is designed to detect the amount of the exhaust gas air and fuel ratio. It is constructed from durable material that is corrosion and abrasion resistant. This sensor features zirconia solid electrolyte integrated with alumina heater substrate which precicely controls the amount of oxygen concentration that flows into the diffusion layer to limit current flow. This sensor can easily be installed and ensures longevity.

Customer Reviews

Most helpful customer reviews

19 of 19 people found the following review helpful.
Perfect match 2001 Toyota Sienna- P1135 P1155 You may want 2 if high mileage...
By Nikon Owner
My wife's 2001 Toyota Sienna had the Check Engine Light (CEL) on and was a P1135 error code (faulty signal O2 Sensor) on the Bank 1 Sensor 1 (which is on the back of the engine by the firewall). I bought 1 of these to replace the one the error code indicated... it was a perfect match, but after clearing the error code, a P1155 error showed (the one in the front of the engine... easier to get to) which at 117,000 miles should have been expected. I ordered a second sensor and now we're all good. (OEM has 2 different sensors... the back one had a slightly shorter wire lead... aftermarket they use the one with the longer leads (this product) to replace both front O2 Sensors.)If you have a high mileage car, you may want to replace both... it is a wear item.Helpful resources1) The Toyota Tech document to help you determine where the sensor that needs replacing really is:[...]2) Good video here for how to replace the Bank 1 Sensor 1 (tucked in by the firewall):[...]

14 of 14 people found the following review helpful.
2001 Lexus ES300 P1135 Fixed
By R. Vennam
Check Engine Light: P1135P1135: A/F Sensor Heater Circuit Malfunction (Bank. 1 Sensor 1).Bank. 1 Sensor 1 in my car was the sensor between the engine and the firewall. Its tricky to get to, but doable with a big wrench, and a couple of jack stands.Here is what I did:1) Find the sensor.2) Spray it well with some PB Blaster while its warm, let it soak for a day.3) Jacked it up, got underneath, and remove the sensor with a big 22mm wrench. This took a lot of effort.4) Put some anti-seize (comes with it) on the new one and screw it in.Problem fixed.

8 of 8 people found the following review helpful.
It's the real thing
By Stephanus A
I ordered this A/F sensor for my 2002 Sienna (bank 2, sensor 1; the easy one on the front exhaust manifold). It came fast by USPS in sealed packaging, complete with the anti-seize compound. It looks exactly the same as the original - the sensor, the wire length/color, the connector - it's the same thing. Removing the old one was hard: several rounds of PB Blaster + time, hard to unplug the connector - push in the plastic securing tab on the connector facing away from the engine! Installing this new one was simple: some anti-seize compound on the thread (only!), screw in by hand, then tighten with a wrench with feel, snap in the connector, put back the clamp holding the wire in place = I just saved at least $200 compared to the dealership charge.

See all 46 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!