Price Compare Denso 234-9009 Oxygen Sensor

Buy Denso 234-9009 Oxygen Sensor

Denso 234-9009 Oxygen Sensor Product Description:

• Manufactured to detect the amount of exhaust gas air fuel ratio
• Constructed from durable material
• Features zirconia solid electrolyte
• Highly accurate
• Easy installation

Product Description

Denso Oxygen Sensor is designed to detect the amount of the exhaust gas air and fuel ratio. It is constructed from durable material that is corrosion and abrasion resistant. This sensor features zirconia solid electrolyte integrated with alumina heater substrate which precicely controls the amount of oxygen concentration that flows into the diffusion layer to limit current flow. This sensor can easily be installed and ensures longevity.

Customer Reviews

Most helpful customer reviews

15 of 15 people found the following review helpful.
Excellent Replacement Part
By SoCalJim
I used this part to replace the California Emissions Air Fuel Ratio Sensor on my 99 Camry V6. Dealer wanted $277 for the factory OEM replacement part, but since the original part I removed was a Denso, I thought this part is probably equivelent to the OEM replacement part. According to my code reader and the manual the bad sensor was bank 1, sensor 1, also referred to as rear sensor before the catalytic converter. The after market parts are referenced as front right or front left. It required some research, but I determined that bank 1, sensor 1 is the same as front right in the after market parts. Long story short, I installed this sensor in my Camry over two weeks ago, cleared the diagnositic codes, and check engine light has not come back on. This part saved me over $150 from the OEM raplacement part.

7 of 7 people found the following review helpful.
RX300 didn't pass inspections until I swapped out BANK 1 SENSOR 1
By Margaritaville
2002 RX 300 Bank 1 Sensor 1 Replaced. Inspections passed!Worked like a charm.Jack up vehicle on passenger side. Place jackstands x2Slide under from front. ( make sure vehicle is cold )Locate SensorUnplug wiring harness test with OHM meter. (mine read 0.0) (new one read 1.8)Use an O2 sensor socket with ratchet wrench. ( I gently used a breaker bar, 132K miles on vehicle)********* don't forget the ANTI SEIZE goop (comes in package, I forgot to use it, oh well) ****************

3 of 3 people found the following review helpful.
Highlandeer 02 sensor
By 02Highlander
Have replaced 2 of the 4 sensors on my 02 highlander. Amazon prices are the best. The second time I ordered it was even $20 less than the first! Go with Denso, OEM.

See all 72 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Cheapest Extang 7790 Classic Platinum Tonneau Cover

Buy Extang 7790 Classic Platinum Tonneau Cover

Extang 7790 Classic Platinum Tonneau Cover Product Description:

• Uses an aluminum frame that is clamped to the top of the truck's bed rails
• Fast and easy access to truck bed and cargo by simply dropping tailgate or by rolling up the tarp
• One-handed tail rail quick release with the patented ClickLock corner system
• SnapStopper keeps snaps on the rail when tarp is rolled up for bulk hauling
• Frame is backed by a lifetime warranty

Product Description

Extang Classic Platinum Tonneau Cover is made entirely of durable aluminum with a sturdy, reinforced black vinyl tarp and moveable stainless steel TuffSnaps. The fabric is then snapped onto the tonneau cover frame. When rolled up, the fabric support bows are stored loosely in the truck bed or left at home. They are field tested and proven that the TuffSnaps stainless steel and brass snaps adjust for perfect tarp tension and will not break. It does not require drilling and thus installs in minutes with no tools. For larger loads, remove the tail rail fast with one-handed ClickLock release system.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
functional, but not great!
By Bruce D. Clark
I spent a lot of time researching tonneau covers before I bought this one. I was concerned about a couple other reviews on the Extang brand name, but overall the reviews were good. My deciding factor was the price and the fact that it was available from Amazon and not some other vendor. I do a lot of purchasing through Amazon for my classroom supplies, mainly power tools and accessories (wood shop teacher). I've had limited satisfaction through other vendors, so I tend to stick with Amazon.I've only got two complaints about the Extang Classic. 1st...it's not long enough. Realistically it's about an inch or 2 too short. I had to "fudge" the placement so that it doesn't leave an opening at either one end or the other. The second complaint is that, and this is on a 2007 Ford F150, in the manufacture of the truck there are pins that stick down exactly where Extang wants the clamps to go. The clamps won't fit where they want them to go so you have to move the front and rear clamps either 2 inches forward or backward. It really doesn't affect the function of the tonneau cover other than the support for the cover is not evenly distributed. Both of these are engineering problems and should have been checked for proper fit before they marketed it for that brand of truck. Not good attention to detail on their part. I will give them this benefit of the doubt in that I haven't called them on it yet.I've only had this cover for about a month, so it really hasn't been tested yet. That will come in the spring and summer when I start hauling my Cub Scouts, Boy Scout, and all their gear to camps. I've got 3 boys so this cover will get a work out. So far I would not discourage anyone from buying this tonneau cover. So far I really like it.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Prices Denso 234-9002 Air Fuel Ratio Sensor

Buy Denso 234-9002 Air Fuel Ratio Sensor

Denso 234-9002 Air Fuel Ratio Sensor Product Description:

• Manufactured to detect the amount of exhaust gas air fuel ratio
• Constructed from durable material
• Features zirconia solid electrolyte
• Highly accurate
• Easy installation

Product Description

Denso Air and Fuel Ratio sensor is designed to detect the amount of the exhaust gas air and fuel ratio. It is constructed from durable material that is corrosion and abrasion resistant. This sensor features zirconia solid electrolyte integrated with alumina heater substrate which precicely controls the amount of oxygen concentration that flows into the diffusion layer to limit current flow. This sensor can easily be installed and ensures longevity.

Customer Reviews

Most helpful customer reviews

12 of 13 people found the following review helpful.
Just what I needed
By A. Miller
Like Javier, I had "Check Engine" and "VSC Trac" lights on a 2001 Toyota 4Runner. Had an auto parts store pull the code (P1135) from the truck's computer, and decided to shop around when they wanted $200 for the part. I saved about $70 by buying the part here and probably $60-80 more by doing the repair myself. It's not a bad job, especially if you search online for a how-to. The hardest part was actually unplugging the connector on the old sensor. Looking at the new sensor helped me to figure out how to do it; basically I used a small screwdriver to lift up a tab that locks the connector into place. Also, once the new sensor is installed you may need to disconnect the battery in order to reset the computer and turn off the check engine light. Once I did that, the problem was fixed!

8 of 9 people found the following review helpful.
OEM Part, Works Great... Cheapest Price Around
By A. Silva
This is an OEM Denso front Oxygen Sensor. I installed it in my '01 Toyota Tacoma 4x4(3RZFE 4-Cyl) and it plugged right into the OEM wiring plug plug for the front O2 sensor.. perfect fit. It also comes with the oxygen sensor gasket, which is an added bonus because that part sells for $6 at the Toyota dealership.

5 of 5 people found the following review helpful.
Denso is factory OEM
By Patrick H. McMurray
My 4runner had 70,000 miles when the oxy sensor coded. Average is around 75,000 miles. The sensor ahead of the cats-california models had 2 catalytic converters and is also called the "air/fuel sensor" on those- is usually first to go.Replacement is basic. Now the annoying "check engine" light is off, and the engine is running per spec. Denso is considered the best replacement brand by most toyota fans.

See all 41 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!